DHC BT2400 Manual Del Propietário página 13

10. Select NEXT to review the complete system test results including the
cranking, idle, ripple, & load on test results.
11. Use directional keys to switch between 4 different pages of the system test
results.
12. Select PRINT if you would like to print out the system test result.
Cranking Test
Test
Cranking Voltage
Report
Lowest Voltage
Alt. Test
Idle
Test
Voltage
Report
Load
Voltage
<PRINT> <DONE>
CRANKING TEST RESULTS:
1. CRANKING VOLTS NORMAL
The system is showing normal draw. Press «ENTER» to perform the
charging system test.
2. CRANKING VOLTS LOW
The cranking voltage is below normal limits, troubleshoot the starter with
manufacturers recommended procedure.
3. CRANKING VOLTS NOT DETECTED
The cranking voltage is not detected.
Normal
Test
10.78V Report
9.09V
Normal
Test
13.87V
Report
Normal
13.93V
13
Cranking Test
Ripple Test
Normal
Ripple Voltage
0.12V
<PRINT> <DONE>