Steinberg Systems SBS-EH-600/18 Manual De Instrucciones página 32

Do not touch any moving parts or accessories unless the unit is
k)
unplugged.
Clean the unit regularly to prevent permanent dirt build-up.
l)
The unit is not a toy. Cleaning and maintenance must not be performed
m)
by children without adult supervision.
Do not tamper with the unit to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
o)
Do not block the ventilation openings of the unit!
p)
Using the unit to carry weights exceeding its maximum load is
q)
forbidden.
Do not allow people or animals to stand under suspended loads.
r)
Transporting the load by means of the unit over people or animals is
s)
prohibited.
Transporting people or animals by means of this unit is prohibited.
t)
When transporting with the unit, avoid shocks, impacts and sudden
u)
changes in speed. This will reduce the risk of the load falling from a
height.
Before suspending the load, always ensure that the space in which it
v)
will be transported is clear of obstructions.
Bystanders should be warned of the operation of the equipment and
w)
should stay at a safe distance from the load.
Always pay close attention to the load.
x)
Do not leave suspended loads unattended.
y)
Avoid rocking the load.
z)
Do not perform mechanical or similar work (welding, cutting, etc.) on
aa)
suspended loads.
If the load falls, there is a risk of injury or death.
bb)
Do not walk or stand under suspended loads (or in their immediate
cc)
vicinity).
Pulling the chain in any direction other than along the travel path when
dd)
using this unit is prohibited. Pulling sideways may cause damage to the
unit
Do not use excessive force or jerk the cable if resistance is encountered
ee)
The equipment should not be used in corrosive environments, at low
ff)
ambient temperatures or to transport hot, liquid masses.
Avoid switching on/off sequences at very short intervals.
gg)
Make sure that the equipment moves in the direction specified by the
hh)
controls.
Disconnect the unit from the power supply when not in use.
ii)