How To Assemble - Lionelo Zanna Manual De Usuario

11. The product can be used by children aged 0,5 to 3, whose weight does not
exceed 15 kg.
12. Use original spare parts only.
13. Before use, make sure the product has been completely unfolded – wheels
must not touch the floor.
List of parts (fig. A)
1.
Tray
2.
Seat
3.
Crotch guard
4.
Tray guides
5.
Upper part of chair frame
6.
Frontal lower part of chair frame
7.
Rear lower part of chair frame
8.
Safety belts

How to assemble

1.
Put the crotch guard in the tray (fig. 1).
2.
Put the upper part of the frame in holes in the seat, and then connect it to
lower part of the frame (fig. 2). Locking keys should be outside. If you can
hear a click, the installation is correct.
3.
Put tray guides (A, fig. 3) on seat connectors. Pay attention to marking on
the left and right side: functional keys should be located on the outer side
of the product.
4.
To remove guides, slide the key on their outer side and remove guides.
5.
T unfold the chair, slide levers at the top of the frame (A, fig. 4) and spread
the product. If you can a hear a distinctive click, the chair has been unfolded
correctly.
6.
Slip the tray onto guides, keeping adjustment keys pressed (A, fig. 6). You can
set the tray in one of three positions. Make sure the tray is stable.
7.
The semi-automatic unfolding system activates when you pull the lever in
the upper part of the frame and start unfolding the product. The system is
effective on slippery surfaces, such as tiles, panels, etc. The system remains
ineffective on such surfaces as carpets, sheet flooring, etc.
EN ‑ 6 ‑