Product Set Up; Product Use; Cleaning And Maintenance - Nuna trvl Manual De Instrucciones

Product Set Up

Open Stroller
1 - Take the stroller frame out (1).
2
- Rotate the stroller handle up (2) and open the
stroller frame (3)(4). A "click" sound means the
stroller frame is open completely.
Check that the stroller is completely latched open
before continuing.
Basket
Hook the basket on the rear legs on the both sides. (5)
Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click"
sound means the rear wheel is assembled
completely. (6)
Check that the wheels are securely attached by
pulling on them.
2
- To remove the rear wheel, press the release button
(7)-1 and detach the rear wheel from the rear leg
(7)-2.
Front Wheels
1
- Insert the front wheel into the front leg. A "click"
sound means the wheel is assembled completely.
(8)
Check that the wheels are securely attached by
pulling on them.
2 - To remove the front wheel, press the release
button (9)-1 and then detach the front wheel from
the front leg (9)-2.
Canopy
Slide the canopy mounts onto the stroller (10). A "click"
sound means the canopy is assembled completely.
Armbar
1 - Align the armbar ends with the armbar mounts,
and insert until it clicks into place (11).
A "click" sound means the armbar is assembled
completely.
2 - Press armbar release button (12)-1, and then pull
up the armbar (12)-2.
Always secure the child with the harness. The
armbar is not a restraint device.
Armbar can be open for easy seating and unseating
of child.
7
TRVL instructions

Product Use

Securing Your Child
The parking brake MUST be engaged when the
stroller is stopped and when placing and removing
child.
To avoid serious injury from falling or sliding out,
always use the seat belt.
Make sure the harness is adjusted properly and
your child is snugly secured. The space between
the child and the shoulder harness should be about
the thickness of one finger. DO NOT cross the
shoulder belts. This will cause pressure on your
child's neck.
1
- Push the top button (13)-1, the buckle will release
automatically.
2
- Match the waist belt buckle with the shoulder
buckle, and align them with the center buckle, the
buckle can lock automatically. (14)
3
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten (15)-1. Then pull the
waist adjustment straps out (15)-2.
Shoulder Harness Position
1
- Thread the fixing webbing on the Shoulder harness
pads through the hole of buckle. (16)(17)
2 - The upper shoulder harness buckles can be moved
up and down for added adjustment. (18)
Canopy
For added air flow, unzip the back zipper to expose the
mesh. (19)
Calf Support
The calf support has 2 positions.
1
- To raise the calf support, lift up.
2
- To lower the calf support, press the adjustment
button in the middle of the calf support (20)-1, and
push down (20)-2.
Recline
1
- To raise the recline, pull the tether and push the
seat up. (21)
2
- To recline the backrest, squeeze the backrest
adjustment handle and pull the backrest down
(22).
Make sure the recline is adjusted properly for use.
Brake
1
- To lock the rear wheels, step down on the brake
lever. (23)
2
- To unlock the rear wheels, step down the brake
lever again. (24)
Always apply the brake when the stroller is
stopped.
Push the stroller slightly to ensure the brake is
engaged.
Front Swivel Locks
1 - It is recommended to use the front swivel locks on
uneven surfaces.
2
- Turn the front swivel lock to lock the front wheel
(25). Turn back to unlock (26).
Fold
1 - Fold the canopy. (27)
2
- Slide the secondary lock and then squeeze the
folding button (28).
3
- While squeezing the folding button, fold the handle
down, the stroller will fold and stand on its own.
(29)-(31)
4
- You can carry the stroller with the strap. (32)
Accessories
Not all accessories are included on some models.
PIPA Series Infant Child Restraint
For infant carrier assembly and usage, please refer to
the infant carrier instruction manual.
Recline the stroller seat to the lowest position,
push the canopy to the rear of the stroller and
attach the arm bar.
1
- To open the infant carrier lock, slide the latch out
(33)-1. To close the infant carrier lock, slide the
latch in (33)-2.
2 - Place the infant carrier on the stroller so it sits over
the arm bar (34). Then close the infant carrier lock.
(33)-2
Pull up on the infant carrier to check that it is fully
locked to the stroller.
Remove the infant carrier before folding.
3 - To remove the infant carrier, open the infant carrier
lock (33)-1, squeeze the release handle (35)-1 and
lift the infant carrier up (35)-2.

Cleaning and Maintenance

Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use
silicon lubricants as they will attract dirt and grime. Do
not store your stroller in a damp place.
Clean the stroller wheels regularly with water and
remove any dirt.
To ensure long-lasting use, wipe off this product with a
soft, absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for
washing and drying instructions.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when
used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If
any parts are torn, broken, or missing, stop using this
product.
NUNA International B.V. Nuna and all associated logos are trademarks.
TRVL instructions
8