Product Set Up - Nuna Demi Grow Manual Del Usuario

Product Set Up

Open Pushchair
1
- Separate the storage latch from the storage mount. (1)
2
- Then, rotate the pushchair handle up. (2)
3
- A "click" sound means the pushchair frame is open
completely. (3)
Check the pushchair frame is completely latched open
before continuing.
Rear Fenders
Attach the rear fenders for twin and double modes.
1
- Insert the rear fender into the rear leg. A "click" sound
means the fender is assembled completely. (4)
Check the fender is securely attached by pulling up.
Repeat on opposite side.
Rear Wheels
1
- Insert the rear wheel into the rear leg. A "click" sound
means the rear wheel is assembled completely. (5)
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
2
- To remove the rear wheel, press the release button (6)-1
and detach the rear wheel from the rear leg (6)-2.
10 DEMI grow pushchair instructions
Front Wheels
1
- Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely. (7)
Check the wheel is securely attached by pulling out Repeat
on opposite side.
2
- To remove the front wheel, press the release button (8)-1
and detach the front wheel from the front leg (8)-2.
Canopy
1
- Clip the canopy mount onto the pushchair/sibling seat on
each side. (9)
2
- Zip the canopy to the pushchair/sibling seat. (10)
3
- To remove the canopy, open the zippers, then remove the
canopy mounts. (11)
Arm Bar
1
- Align the arm bar ends with the arm bar mounts, and insert
until it clicks into place. A "click" sound means the arm bar
is assembled completely. (12)
2
- To remove the arm bar, press the arm bar release buttons
(13)-1 located under seat pad, and remove the arm bar. (13)-2
3
- For a more compact fold, press the armbar adjustment
buttons (14)-1 and rotate the armbar down (14)-2 until it
clicks into place.
Only use the down/stored position for folding. NEVER use
this position with child in stroller.
DEMI grow pushchair instructions 11