Canon MF635Cx Guía De Inicio página 79

Handling
WARNING
Immediately unplug the power plug from the
•
AC power outlet and contact an authorized
Canon dealer if the machine makes an unusual
noise, emits an unusual smell, or emits smoke
or excessive heat. Continued use may result in
a fire or electrical shock.
• Do not disassemble or modify this machine.
There are high-voltage and high-temperature
components inside the machine. Disassembly
or modification may result in a fire or electrical
shock.
Place the machine where children will not
•
come in contact with the power cord and
other cables or gears and electrical parts inside
the machine. Failure to do so may result in
unexpected accidents.
Do not use flammable sprays near this
•
machine. If flammable substances come into
contact with electrical parts inside this
machine, it may result in a fire or electrical
shock.
• When moving this machine, be sure to turn
OFF the power of this machine, and then
unplug the power plug and interface cables.
Failure to do so may damage the power cord
or interface cables, resulting in a fire or
electrical shock.
When plugging or unplugging a USB cable
•
when the power plug is plugged into an AC
power outlet, do not touch the metal part of
the connector, as this may result in an electrical
shock.
• Use a modular cable that is shorter than 3
meters.
Use a USB cable that is shorter than 3 meters.
•
If the operating noise concerns you
Depending on the use environment and
operating mode, if the operating noise is of
concern, it is recommended that the machine be
Installed in a place other than the office.
If you are using a cardiac pacemaker
This machine generates a low level magnetic
flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this
machine and consult your physician
immediately.
CAUTION
• Do not place heavy objects on this machine as
they may fall, resulting in injury.
For safety, unplug the power plug if the
•
machine will not be used for a long period of
time.
Use caution when opening and closing covers
•
to avoid injury to your hands.
• Keep hands and clothing away from the rollers
in the output area. If the rollers catch your
hands or clothing, this may result in personal
injury.
• The inside of the machine and the output slot
are very hot during and immediately after use.
Avoid contact with these areas to prevent
burns. Also, printed paper may be hot
immediately after being output, so use caution
when handling it. Failure to do so may result in
burns.
Be careful not to drop a heavy object, such as
•
a dictionary, on the platen glass. Doing so may
damage the platen glass and result in injury.
• Do not carry the machine with the paper
drawers installed. Otherwise, the paper drawer
may fall and result in injury.
Feeder (only for products with a feeder)
• Do not press down hard on the feeder when
using the platen glass to make copies of thick
books. Doing so may damage the platen glass
and result in personal injury.
• Close the feeder gently to avoid catching your
hands, as this may result in personal injury.
Close the feeder gently to avoid catching your
•
hands in the back of the feeder, as this may
result in personal injury.
Finisher (only for products with a finisher)
Do not place your hands in the part of the tray
•
where stapling is performed (near the rollers),
especially pay careful attention to the sharp
staples, as this may result in personal injury.
Paper drawer (only for products with a paper
drawer)
• Do not insert your hand into the machine
while the paper drawer is removed, as this may
result in personal injury.
Energy Saver key (only for products with an
Energy Saver key)
• Press (Energy Saver) for safety when the
machine will not be used for a long period of
time, such as overnight. Also, turn OFF the
main power switch, and disconnect the power
cord for safety when the machine will not be
used for an extended period of time, such as
during consecutive holidays.
Laser Safety
This product is confirmed as a Class 1 laser
product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LÁSER DE CLASE 1
APARELHO A LASER DE CLASSE 1
LUOKAN 1 LASER-TUOTE
LASERPRODUKT KLASS 1 The laser beam can be harmful to human bodies.
Since radiation emitted inside the product is
completely confined within protective housings
and external covers, the laser beam cannot
escape from the machine during any phase of
user operation. Read the following remarks and
instructions for safety.
Never open covers other than those instructed
•
in the manuals for this machine.
If the laser beam should escape and enter your
•
eyes, exposure may cause damage to your
eyes.
CAUTION
Use of controls, adjustments, or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure.
Other precautions
• Follow the instructions on the caution label
attached to this machine.
Do not subject the machine to strong shocks
•
or vibration.
• Do not forcibly open and close doors, covers,
and other parts. Doing so may result in
damage to the machine.
• Do not touch the toner cartridge contacts
). Doing so may result in damage to the
(
machine.
a
• Do not turn the main power switch OFF or
open the covers while the machine is in
operation. This may result in paper jams.
When transporting the machine
To prevent damage to the machine during
transport, perform the following.
Remove the toner cartridges.
•
• Securely pack the machine in the original box
with packing materials.
En
79