Tabla de contenido
Idiomas disponibles
Idiomas disponibles
If the time is set for each camera channel by using L/M KEY, each camera picture will be displayed for
the set time and switched to the next picture automatically.
3-4) DISPLAY MENU function setting
•
Function: Allows users to select the color and ON/OFF of borderline at QUAD DISPLAY.
Setting method: Move to #4. DISPLAY SETTING MENU by using L/M KEY at SETUP MENU,
•
then press the ENTER SWITCH to display the OSD as shown in the figure below. (The figure
shows the initial setting status.)
06/01/03
DISPLAY
BORDER
BORDER COLOR
PIP POSITION
NETWORK STATUS
Move to each item by using L/M KEY, and using ➛/❿ KEY set value.
1) BORDER item determines whether or not boarder line is displayed at QUAD DISPLAY MODE.
(ON: Displays the boarder line, OFF: Does not display the boarder line)
2) BORDER COLOR item sets boarder line color among three colors: Black, White, Gray.
3) PIP POSITION item sets the location of sub picture at PIP DISPLAY. (T-LEFT: Upper part of left
side, T-RIGHT: Upper part of right side, B-LEFT: Lower part of left side, B-RIGHT: Lower part of
right side)
4) NETWORK STATUS determines the display of [S], [D], [P] displayed at the left of top on the
screen according to status of NETWORK.
Refer to 3-7) NETWORK SETTING function and setting method (Eng-44) for the respective
detailed status.
(ON: Displays the NETWORK STATUS, OFF: Does not display the NETWORK STATUS)
All manuals and user guides at all-guides.com
13:14:00
SETTING
ON
GRAY
B-RIGHT
ON/OFF
Eng-41
E
Capítulos
Tabla de contenido
