Zanussi ZWH6100 P Manual De Instrucciones página 13

Spin Buttons ( )
Quick Wash Buttons (
Select the Delay Start (
Auto Spin Reduction (
washing machine will automatically set the spin speed for
your washing program.
Rinse Hold ( ): by selecting this option the water of the
last rinse is not emptied out to prevent the fabrics from
creasing.
When the program has finished the pilot lights "End Cycle
( )" is on, the Start/Pause (
( )" pilot light are off and the door is locked to indicate
that the water must be emptied out.
To empty out the water:
turn the program selector dial to "O".
select the Drain (
reduce the spin speed if needed, by means of the
relevant button.
depress Start/Pause (
at the end of program, only the pilot light End Cycle ( ) comes on.
This option can be used for lightly soiled in order to obtain
)
a good washing result in a short time.
The washing time will be reduced according to type of
fabric and the selected temperature.
If an option is chosen that is not allowed with the selected
program, the red pilot light of the Start/Pause (
will flash 3 times.
Before you start the program, if you wish to delay the
)
start, press the Delay Start button repeatedly, to select the
desired delay. The relevant light illuminates.
This option makes it possible to delay the starting of the
washing program by 3, 6, and 9 hours.
You must select this option after you have set the program
and before you press the Start/Pause button. You can
cancel the delay time at any moment, before you press the
Start/Pause button.
If you have already pressed the Start/Pause button, and you
wish to cancel the delay time, proceed as follows:
set the washing machine to PAUSE by pressing the
Start/Pause ( ) button;
press the Delay Start (
relevant to the selected delay goes off.
press the Start/Pause (
programme.
): by selecting this option the
) and the "Washing
) or Spin ( ) program.
) button.
) button once, the light
) button again to start the
) button
13