English
► Unplug the mains plug of the pressure
washer from the socket.
► Store the pressure washer out of the reach
of children.
■ Moisture may cause the electrical contacts on
the pressure washer and metal components to
corrode. The pressure washer may be dam‐
aged.
► Store the pressure washer in a clean, dry
state.
■ At temperatures below 0 °C water may freeze
in components of the pressure washer. The
pressure washer may be damaged.
► Drain high-pressure hose and spray attach‐
ment.
► If the pressure washer cannot be
stored in a frost-free environment:
Protect the pressure washer using
a glycol-based antifreeze.
4.13
Cleaning, Maintenance and
Repair
WARNING
■ If the mains plug is plugged into a socket
when carrying out cleaning, servicing or
repairs, it is possible that the high-pressure
washer may be switched on inadvertently.
This may result in serious injury to people and
damage to property.
► Lock the spray gun trigger.
► Switch off the high-pressure washer.
► Unplug the mains plug of the high-pressure
washer from the socket.
■ Harsh detergents, cleaning with a water jet or
sharp objects can damage the high-pressure
washer. If the high-pressure washer is not
properly cleaned, parts may not function prop‐
erly and safety devices can be disabled. They
may cause serious injury to persons.
► Always clean the high-pressure washer as
described in this user manual.
■ If the high-pressure washer is not properly
serviced or repaired, parts may not function
properly and safety devices can be disabled.
This may result in serous or fatal injury to peo‐
ple.
► Do not attempt to service or repair the high-
pressure washer yourself.
► If the connecting cable is faulty or dam‐
aged: Have the connecting cable replaced
by a STIHL dealer.
32
5 Preparing the pressure washer for operation
► If the high-pressure washer needs to be
serviced or repaired: Contact a STIHL
dealer.
5
Preparing the pressure
washer for operation
5.1
Making the pressure washer
ready for use.
The following steps must be performed before
commencing work:
► Make sure that the pressure washer, the high-
pressure hose, the hose coupling and the con‐
necting cord are in a safe condition,
► Cleaning the pressure washer,
► Set up the pressure washer on a firm and level
base, where it will not slide or tip over.
► Connect the high-pressure hose,
► Connect spray gun,
► Fit spray lance,
► Attach nozzle,
6.5.1.
► If using a detergent: Using detergents,
10.4.
► Connect pressure washer to a water source,
7.
► Connect pressure washer to power supply,
8.1.
► If it is not possible to carry out these steps: Do
not use the pressure washer. Consult a STIHL
servicing dealer.
6
Assembling the pressure
washer
6.1
Assembling the high-pressure
washer
Installing the holder
3
1
► Slide the holder (1) into the guides (2).
The holder (1) engages with an audible click.
► Slide the plugs (3) into the mounts.
The plugs (3) engage audibly.
4.6.
14.
6.2.1.
6.3.1.
6.4.1.
2
3
0458-002-9821-B