Tabla de contenido
Frequency of cleaning should be as directed by the product manufacturer.
1
I
O
10:45:30 AM
off
off
1. Turn cooling to OFF selection.
Empty all product from the
Hoppers. Turn Auger to OFF
selection.
4
4. Remove Hopper Lids.
6
a
6. Removing Handles
a. While slightly twisting the
Handle, pull the left side
off the left Pivot Pin.
b. Then spread Handle on
right side to remove from
right Pivot Pin.
2
2. Disconnect the Hopper Lid
Cords on the back of the
Hoppers.
NOTE: If it's an Autofill unit;
disconnect the Fill Hoses from
the back of the Hoppers also.
7
b
7. Carefully slide the Faucet
Valve up to remove the
Spring and Faucet Seal.
NOTE: Extra care should be
taken when handling the
seal to prevent damage.
Do not fold the seal as this
will cause damage to the
Teflon
®
CLEANING
Seal
sealing surface.
16
3
3. Disconnect the Level
Probes at the top rear of
the Hoppers.
5
5. Remove the Faucet Assembly.
CAUTION: The Faucet Valve
is under Spring tension. Use
tab on left side of the Handle
to pull off Pivot Pin.
8
8. Depress the Hopper Lock
Plunger and lift the Hopper
up slightly.
continued >
Tabla de contenido
