Tabla de contenido
USING THE DISPENSER FOR GRANITA-TYPE PRODUCTS
1. Lift the lid slightly for the selected hopper and slide back to gain access to the hopper.
2. Place the pre-mixed liquid product in the selected hopper.
3. Press and release the ON/OFF switch to power on the dispenser.
4. Press and release the appropriate (left or right side) ON/OFF switch to start the Auger Motor
and to turn on AutoFill when applicable.
5. Press and release the (OFF/ICE/CHILL) switch and select ICE to begin the cooling process for
the selected hopper.
6. Wait for the liquid to freeze to the desired consistency.
HINT: BUNN recommends that the product in the dispenser be thawed each day, usually overnight.
The ice granules get too large and a consistent product is difficult to maintain if left frozen for an
extended period of time. Set the NIGHT mode for a few hours each night and return it to the DAY
mode when the product has thawed sufficiently. You'll know it is in the NIGHT mode because the
display will indicate NIGHT MODE, and the hopper light(s) will turn off.
USING THE DISPENSER FOR COLD LIQUID PRODUCTS
1. Lift the lid slightly for the selected hopper and slide back to gain access to the hopper.
2. Place the pre-mixed liquid product in the selected hopper.
3. Press and release the ON/OFF switch to power on the dispenser.
4. Press and release the appropriate (left or right side) ON/OFF switch to start the Auger Motor
and to turn on AutoFill when applicable.
5. Press and release the (left or right side) OFF/ICE/CHILL switch and select CHILL to begin the
cooling process for the selected hopper.
6. Wait for the liquid to cool.
10
continued >
Tabla de contenido
