Cancelling The Programme - Beko HTV 8636 XS0 Manual Del Usuario

• Open the pump filter lid.
• Release the loading door emergency
handle at the back of the filter lid.
• Pull down the loading door emergency
handle to open the loading door. After
opening the door, return the emergency
handle to its original position.
• If you cannot open the loading door,
try pulling down the handle again.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started
When you press the Start/Pause button, the
"Loading door locked" light on the panel will go
off if the water level in the machine is suitable.
If the water level in the machine is not suitable
when you press the Start/Pause button, the
panel will warn you that the door is closed.
32 / EN
5.17.2 Switching the
machine to pause mode
Press the Start/Pause button to
switch the machine to pause mode.
5.17.3 Changing the
programme selection after
the programme has started:
If Child Lock is not enabled, you can change
programme while the current one is running.
This will cancel the current programme.
C
• The newly selected programme
will start anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the programme has
reached, you can cancel or select auxiliary
functions. See "Auxiliary function selection".
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
:
• If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.

5.18 Cancelling the programme

The programme will be cancelled if the
programme selection knob is switched to
another programme or if the machine is
switched off and on with this button.
INFORMATION
INFORMATION
Washer-Dryer / User's Manual