Starting The Programme - Beko HTV 8636 XS0 Manual Del Usuario

5.14 End Time
With the End Time function, start of
the programme can be delayed up to
24 hours. After pressing the End Time
button, the programme's estimated end
time will be displayed. If an End Time is
set, the End Time light will turn on.
To ensure that the End Time function is
enabled and the program ends at the end of
the defined duration, you should press Start
/ Pause after setting the duration. The Start/
Pause button will stop flashing and remain on.
If you want to cancel End Time function,
press the End Time button until the End
Time light turns off or press the On/Off
button to turn off and on the machine.
1. Open the loading door, place the
laundry and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Press the End Time button to set the desired
end time. The End Time light will turn on.
4. Press the Start / Pause button. Countdown
will start. ":" sign in the middle of the end
time on the display will start flashing.
C
INFORMATION
• Do not use liquid detergents when
you enable the End Time function!
Stains might remain on the clothes.
• The door will remain locked during the End
Time countdown. If you want to unlock
the door, press the programme start/
pause button to switch the machine to
pause mode. At the end of the countdown,
End Time indicator turns off, washing
cycle starts and the time of the selected
programme appears on the display.
• When End Time is selected, the time
displayed on the screen consists
of the end time plus the duration
of the selected programme.
31 / EN

5.15 Starting the programme

-
1. Press the Start/Pause button
to start the programme.
2. The flashing light of the Start/Pause
button will remain on, indicating that
the programme has started.
3. Loading door will be locked. When
the door is being locked, "Locking
Door" warning will be displayed.
5.16 Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the loading door when the water
level is unsuitable to open the door.
"Loading door locked" light on the panel
turns on when the loading door is locked.
C
• The door will be locked if the Remote
Control function is selected. To open the
door, you need to press the Remote Control
key or change the programme position to
deactivate the Remote Control function.
Opening the loading door in
case of power failure:
C
• In case of a power failure, you can
use the loading door emergency
handle under the pump filter lid to
manually open the loading door.
A
• Before opening the loading door,
make sure that there is no water in
the machine to avoid flooding.
INFORMATION
INFORMATION
WARNING!
Washer-Dryer / User's Manual