Figure 19: Propass Conveyor Belt With Clearance; Figure 20: Conveyor Pinned In The Travel Position; Figure 21: Conveyor Hose Routing - TYCROP ProPass 180 Top Dresser Manual Del Operador

19 [shown with belt scraper removed] black
arrow) is greater than ¼" (6.35mm), loosen the
four ¼" (6.35mm) bolts on the Adjustable Guard
(Figure 19 arrows) and slide the guard until it is
spaced approximately ¼" (6.35mm) from the
ProPass main conveyor belt.

Figure 19: ProPass conveyor belt with clearance

5. Pin the conveyor in the "travel position" with the
motor on the right hand side of the ProPass
(Figure 20). Connect the hoses as shown in Figure
21: Conveyor hose routing(note the conveyor has
been moved from its travel position for clarity of
hose routing).

Figure 20: Conveyor pinned in the travel position

Setup Instructions
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd. ProPass 180 Top Dresser Operator's Manual

Figure 21: Conveyor hose routing

Page 17