Hoses And Lines; Engine Safety; Tow Vehicle Safety; Loading - TYCROP ProPass 180 Top Dresser Manual Del Operador

The tow vehicle must meet the following hydraulic
pressure requirements.
Hydraulic Pressure
Minimum
Maximum

Hoses and Lines

Hydraulic hoses and lines can fail because of physical
damage, kinks, age, and exposure. Check the hoses and
lines regularly and replace them if necessary.
Fluid connections can loosen because of physical damage
and vibration. Check and tighten the connections regularly.
Fluid that escapes under high pressure can cause serious
injury. Disconnect the hydraulic or other lines to relieve
the pressure. Tighten the connections before applying
pressure.
: Protect your hands and body
W
ARNING
from high-pressure fluids. Search for
hydraulic leaks with a piece of cardboard.
If an accident occurs, see a doctor immediately. Any fluid
that penetrates the skin must be removed by a doctor
within a few hours.

Engine Safety

Gasoline is highly flammable—handle it carefully. Use an
approved non-metal, portable fuel container. Static
discharge may ignite gasoline vapors in an ungrounded
fuel container.
Do not remove the fuel cap when the engine is hot or
running.
Do not smoke while handling gasoline.
Do not overfill the fuel tank. Fill to 25 mm (1 in) below
the top of the tank.
Stop the engine before doing maintenance work.
Safety Instructions
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd.
22.7 L/min (6 U.S. gpm)
138 bar (2,000 psi)
37.9 L/min (10 U.S. gpm)
193 bar (2,800 psi)
ProPass 180 Top Dresser Operator's Manual
: Do not touch the engine,
C
AUTION
exhaust, or hydraulic reservoir while the
engine is running or soon after. Hot
surfaces may cause burns.

Tow Vehicle Safety

: Always use a suitable tow
W
ARNING
vehicle to move the ProPass, even for
short distances. An unsuitable tow vehicle
can damage the ProPass, or cause injury
or death.
A suitable tow vehicle must have a minimum towing
capacity of 1,405 kg (3,100 lb) for tow-behind chassis,
1,530 kg (3320 lb) if the ProPass 11HP – Hydraulic Power
Pack is fitted, or 1450 kg (3200 lb) for TYCROP direct
connect chassis.
On TYCROP's tow-behind chassis the maximum carrying
load for the ProPass is 907 kg (2,000 lb), with a resulting
tongue weight of 113 kg (250 lb). The tare weight (no
load) is 499 kg (1,100 lb), with a resulting tongue weight
of 23 kg (50 lb).
The resulting tongue weight of the ProPass fitted with the
11HP – Hydraulic Power Pack when operating with a full
load is 145 kg (320 lb). The resulting no load tongue
weight is 48 kg (105 lb). The tare weight (no load) is
599 kg (1,320 lb).
On TYCROP direct connect chassis the maximum carrying
load for the ProPass is 907 kg (2,000 lb), with a resulting
weight transfer of 272 kg (600lbs) to the tow vehicle. The
tare weight (no load) is 544 kg (1,200 lb), with a resulting
weight transfer of 52 kg (115 lb) to the tow vehicle.

Loading

: Ensure that the ProPass is
W
ARNING
connected to the tow vehicle before
loading.
Do not carry loads that exceed the load limits of the
ProPass, or the tow vehicle or truck-mount vehicle (see
Specifications).
Page 9