Setup Instructions; Installing The Options; Figure 12: Twin Spinner; Figure 13: Vortex Brush - TYCROP ProPass 180 Top Dresser Manual Del Operador

Setup Instructions

An authorized TYCROP Distributor normally sets up the
ProPass 180 Top Dresser at the time of purchase. See the
Setup Manual for details.
This section covers only how to install the Twin Spinner
option or the Vortex Brush option onto the ProPass.

Installing the Options

1. Remove the holding straps from the option.
2. To lift the option:
•
Lift the Twin Spinner using the support handles
on each side (Figure 12).
•
Lift the Vortex Brush using the support handle on
the right side, and the guard arm on the left side
(Figure 13).
: For safety, use two people to
C
AUTION
lift the Twin Spinner. It weighs 68 kg
(150 lb).

Figure 12: Twin Spinner

Setup Instructions
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd. ProPass 180 Top Dresser Operator's Manual

Figure 13: Vortex Brush

3. Slide the option onto the flanges of the side rails
(at the rear of the ProPass), lining up the
mounting guides on each side.
4. Lock the option into place with the locking
clamps on each side.
5. Adjust the locking clamps until the clamps are
just firm when closing (See Figure 14 and 13).

Figure 14: Locking clamps for Twin Spinner

Page 15