Kohler Quiet-Close K-8298-CR-0 C3-455 Instrucciones De Instalación página 8

5. Install the Remote Control
Position the docking station at the desired mounting location.
Confirm that the docking station is level.
Using a pencil, mark the two mounting-hole locations.
For installation into a stud or other wood surface: Drill a 1/16" (2 mm) hole at each of the marked locations.
For installation using wall anchors: Drill a 1/4" (6 mm) hole at each of the marked locations. Install the provided wall
anchors into the holes.
Position the docking station over the anchors or marks. Secure with the provided screws.
Remove and retain the cap to the battery compartment.
Install the four provided AA batteries in the orientation shown.
Reinstall the cap to the battery compartment.
Place the remote control on the docking station.
1341257-2-E
1/16" (2 mm)
or 1/4" (6 mm)
Holes
8 Kohler Co.