Clean Water Distributor; Clean Suction Tube; Technical Specifications - Kärcher BR 4.300 Manual De Instrucciones

Clean water distributor

Take out the brush roller.
Pull the water distribution bar out of the
brush tunnel (Fig. 4, see inside front
cover).
Clean the irrigation channel and the
opening in the water distribution bar un-
der running water.

Clean suction tube

Remove the fresh water reservoir from
the appliance.
Swivel support bow downward and re-
move the waste water reservoir.
Pull the suction tube connection out to-
ward the rear of the appliance and swiv-
el out both ends of the suction tube (Fig.
5, see inside front cover).
The suction tube is separated and both
ends are accessible for cleaning.
Pull the vacuum bar off toward the bot-
tom, the suction channel in the cleaning
head is accessible for
cleaning (Fig. 6, see inside front cover).
Flush the suction hose and the suction
channel with water or pull or push the
obstruction out with a blunt object.

Technical specifications

Power
Nominal voltage
Frequency
Average power con-
sumption
Protective class
Type of protection
Vacuuming
Cleaning power, air
quantity
Cleaning power, neg-
ative pressure
Cleaning brush
Working width
Brush diameter
Brush speed
Dimensions and weights
Theoretical surface
cleaning perform-
ance
Fresh/dirt water res-
ervoir volume
Length x width x
height
Transport weight
Total weight
Values determined as per EN 60335-2-
67
Hand-arm vibration
value
Uncertainty K
Sound pressure level
L
pA
Uncertainty K
Sound pressure level
L
WA
Uncertainty K
6
-
EN
V 220...240
Hz 1~ 50/60
W 820
I
IPX4
l/s 26
kPa 13
mm 300
mm 60
1/min 1450
m²/h 200
l 4
mm 390 x
335 x
1180
kg 12
kg 16
m/s <2,5
2
m/s 0,2
2
dB(A) 72
dB(A) 1
pA
dB(A) 85
dB(A) 1
WA
15