HTW SETA Manual Del Usuario página 35

STEP 3
Place the tank shell on the bracket.
STEP 4
4-1. Remove the 4 burner screws.
4-2. Insert the gas hose into the post.
4-3. Attach the burner unit to the post with the 4 screws.
STEP 5
5-1. Check if the vertical post connection and burner are assembled
according to the instructions and if all bolts and nuts are tightened.
5-2. Place 6 large flat washers on 3 reflector spacers.
13
STEP 3
Tank
housing
STEP 4
Screws
STEP 5
Reflector spacer