Assembly Procedures - HTW SETA Manual Del Usuario

ASSEMBLY PROCEDURES

NOTE: Attach the wheel assembly (optional) to the base.
A. Align the holes in the wheel bracket with the corresponding
holes in the base.
B. Ensure that the wheel assembly is parallel to the base and fully
tighten the bolts.
STEP 1
1-1. Attach the 3-piece post brackets to each base position as shown in
the picture.
1-2. Use 3 medium bolts (M8x15) to attach the post brackets and the
stand.
STEP 2
2-1. Attach the post to the top of the 3-piece post brackets.
2-2. Use 6 large bolts and flange nuts (M6) to connect the pole to the
3-piece pole brackets. Tighten the bolts and nuts.
12
STEP 1
Post
support
Screws
Base
STEP 2
Post
Screws
Nut