Taurus BAPI 1200 ROCKET COMPLET Manual página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure
on the on/off button.
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.1):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food,
crush ice ...
- Attach the stick to motor body and turn in the
direction of the arrow (Fig.1.1).
- Put the food to be prepared in the jar and
switch the appliance on.
- For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow.
CHOPPING ACCESSORY (FIG.2):
- This accessory is used to chop vegetables or
meat...
- To avoid damage to the appliance, remove
bones, nerves, cartilage, etc. from the meat.
- Put the food to be prepared in the chopping
container and attach the cover firmly (Fig.2.1).
- Attach the adapter fitting to the motor body and
turn in the direction of the arrow (Fig.2.2).
- Switch the appliance on. Be careful: do not
switch the appliance on if the whole unit is not
properly fitted and connected together .
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid, and release the
adapter fitting .
DOUBLE WHISK ACCESSORY (FIG.3):
- This accessory is used to whip cream, beat
egg whites...
- Insert the whisks into the adapter fitting. Attach
the unit to the motor body and turn in the
direction of the arrow. (Fig.3.1).
- Put the food into a large receptacle and switch
the appliance on. For best results, turn the
whisks clockwise
- Remove the whisks and release the adapter
fitting.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which
protects the appliance from overheating.
- If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- The following pieces may be washed in a
dishwasher (using a soft cleaning program):
- Stick blender
- Jar chopper
- Measuring cup.
- The draining/drying position of the articles
washable in the dishwasher or in the sink must
allow the water to drain away easily (Fig.4).
- Then dry all parts before its assembly and
storage.
Tabla de contenido
loading

Tabla de contenido