De Dietrich DTI514 Serie Guía De Utilización Y De Instalación página 23

99635721_ML_A.qxd 20/12/04
F
itting
58
5,9
48,8
The unit must be installed so that the mains plug is easily
accessible.
C
onnection
These hobs are delivered with type H 05 VVF power cable (1.5mm²) with 3/5 conductors (including a
green/yellow earth wire), which must be connected to the power supply via a plug that complies with
publication CEI 60083 or an all-pole cut-out unit with contacts that open by at least 3mm.
If the cable is damaged, it must be replaced by the manufacturers, their After Sales Service or another
similarly qualified person for avoiding any possible risk of accident.
When the power is switched on, or after a long power failure, a light code appears on the control panel.
This disappears automatically after about 30 seconds or as soon as any touch control is touched on the
panel. This is normal, as the display is for use by the after-sales service when required. The user must
not take this into account under any circumstances.If the unit has a 3 phase 400 V2N connection, and is
not working correctly, check that the neutral wire is correctly connected. This precaution should also be
taken for all your other electronic apparatus.
- 220-240 V monophase
fuse : 32 amp
Blue
brown
L
N
16:24 Page 23
All manuals and user guides at all-guides.com
Installing your hob in complete safety
51
55,5
dimensions in cm
Green/yellow
Black
Separate the 2 phase
wires L1 and L2 before
connecting
23
A seal exists for preventing
any humidity getting under
the hob.
-Stick the seal under the rim
of the hob and lower the
hob into position on the
worktop.
-This seal is supplied in the
sachet; stick it in place
beneath the hob.
fix the clips onto the hob
- 400- V 2N three-phase
fuse : 16 Amp
Green/yellow
brown
Blue
Black
N L1 L2