Boost Function; Maintenance/Cleaning - Silvercrest SIKP 2000 F1 Manual De Instrucciones E Indicaciones De Seguridad

How to use the milk function:
1. While the induction hob is running, press the button for the milk function
then alternates between showing "60" and the remaining keep-warm time (starting at "20" minutes).
The milk function indicator (18) lights up. While the remaining keep-warm time is shown, the indicator
(16) is lit up at the same time.
 If necessary, you can use the boost function at the same time (see below). After the heating
time of 30 seconds at full power, the device automatically switches back to the milk
function.
 The milk function cannot be combined with the keep-warm function.
 While the milk function is activated, press the function button
function and continue at power level L05.

7.8 Boost function

The boost function helps accelerate the cooking process. The induction hotplate runs at full power for 30
seconds then switches back to the previous power level, temperature or function selected.
How to use the boost function:
1. Switch the induction hotplate on and select a power level, a temperature or the milk or keep-warm
function.
2. While the induction hob is running, press the button for the boost function
then shows "L10" and the indicator for the boost function (17) lights up.
After 30 seconds, the induction hotplate switches back to the power level, temperature or function
previously selected.
While the boost function is activated, press the function button
function and continue at power level L05 or temperature 120.

8. Maintenance/cleaning

In order to avoid burning food residues, clean the induction hotplate after every use.
Risk of burns!
Wait until the heating zone (2) is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!

Always remove the power plug from the mains socket before cleaning. Failure to do so
could cause an electric shock.

Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
SilverCrest SIKP 2000 F1
(13). The display (11)
(9) to cancel the milk
(14). The display (11)
(9) to cancel the boost
English - 51