Check Of Frequency In Voltage Mode24; Check Of Frequency In Current Mode24 - Metrix MX 350 Manual De Instrucciones

4. If the resistance is less than 40Ω, the buzzer
sounds continuously.
Check of frequency in voltage mode
1. Set the switch to
2. Connect the red measurement lead to the
input terminal and the black
measurement lead to the
terminal.
3. Apply the probe tips on the points at which
the frequency is to be measured.
4. Read the result on the display unit.
Check of frequency in current mode
1. Set the switch to
2. Place the clamp around the conductor to be
measured and release the trigger; check that
the clamp is correctly closed.
3. Read the result on the display unit.
The simultaneous use of the input terminals and
of the jaws of the clamp throws off the frequency
reading.
(only MX 350)
(only MX 350)
input
24