1.
Thank you for purchasing a MX 350/MX 355. For best
results from your current clamp:
-
read this user manual carefully,
-
comply with the precautions for use.
This device is compliant with safety standard IEC 61010-
2-032, the leads are compliant with IEC 61010-031 for
voltages up to 600 V in category III.
Failure to observe the safety instructions may result in
electric shock, fire, explosion, or destruction of the
instrument and of the installations.
1.1.1. Symbols
WARNING, DANGER! The operator should
refer to this user's manual whenever this
danger symbol appears.
Earth.
Equipment protected throughout by double or
reinforced insulation.
Application or withdrawal authorized on bare
conductors carrying dangerous voltages.
Type A current sensor as per IEC 61010-2-
032.
The rubbish bin with a line through it indicates
that, in the European Union, the product must
undergo selective disposal in compliance with
Directive WEEE 2002/96/EC. This equipment
must not be treated as household waste
The CE marking indicates conformity with
European directives, in particular LVD and
EMC.
Battery
Alternating current.
Direct current
AC or DC
Important instruction
GENERAL INSTRUCTIONS
Precautions and safety measures
17