Portfolio LBSHC011 Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS
1.
Remove socket ring (A) from socket on uplight
(C). Attach glass shade (B) to the socket, securing
with socket ring (A).
CAUTION: Do not overtighten socket ring (A)
as glass may crack or break.
2.
Install bulb (D).
WARNING: When replacing bulb, please
allow bulb and glass shade to cool down before
touching.
Hg
LAMP CONTAINS MERCURY
Manage in accordance with Spills, Disposal and Site Cleanup
Requirements. In case of breakage, follow clean-up
procedures provided by contacts below.
www.epa.gov/cflcleanup
1-866-284-4010
3. Remove preassembled cap from end of power
cord and plug power cord into wall outlet.
NOTE: Use preassembled switch on power cord
to turn lamp ON/OFF.
If light does not function, please refer to
TROUBLESHOOTING on the following page.
3 1
Socket
3 2
3 3
Lowes.com/portfolio
3
A
B
C
D
Cap
Preassembled
Switch