Sime RS MK II Serie Manual Del Usuario página 51

Ocultar thumbs Ver también para RS MK II Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
KEY
1.. Boiler.body
2.. Burner
3.. Burner.manifold
4.. TCB.M5.x.8..
.
screw
5.. Aluminium..
.
washer.ø.14
6.. Burner.nozzle
2.11
ASSEMBLING THE SKIRT
Proceed.as.follows.to.assemble.the.skirt.(fig..
11):
–. Position.the.front.and.back.supports.of.the.
skirt.base.(1).between.the.feet.on.the.two.
heads.
–. Anchor.the.side.supports.(2).and.(3).to.the.
KEY
. 1. Front.and.rear.skirt.base.support
. 2. Right.skirt.base.support
. 3. Left.skirt.base.support
. 4. Lower.left.side.rear.panel
..5. Upper.right.side.rear.panel
. 6. Front.left.side.panel
..7. Rear.lower.right.side.panel.
front.and.back.of.the.skirt.base.(1)..with.the.
M6.nuts.supplied.
–. Anchor.panel.(4).to.panel.(5).and.panel.(7). .
to.panel.(8)..using.the.connecting.pins.
–. and.panels.(7-8).to.panel.(9).using.connec-
ting. pins,. anchoring. them. together. with.
two.7SP.x.1/2".self-tapping.screws.
–. Assemble.panels.(4).and.(6).on.the.base.(3).
..8. Rear.upper.right.side.panel
..9. Front.right.side.panel
. 1 0. Cover
. 1 1. Lower.front.wall
. 1 2. Upper.front.wall.(cleaning.plate)
. 1 3. Rear.wall
. 1 4. Baseboard
. 1 5. Door
,.anchoring.them.on.connecting.pins..Pro-
ceed.in.the.same.way.to.anchor.panels.(7).
and.(9).to.the.base.(2).
–. Position.the.lower.front.wall.(11).by.fitting.
it.in.between.the.screws.on.the.burner.ma-
nifold. support. brackets. and. the. cast. iron.
body;.anchor.the.walls.to.panels.(6).and.(9).
with.two.7SP.x.1/2".self-tapping.screws.
–. Position.the.upper.front.wall.(12).by.ancho-
ring.it.to.panels.(5-8).and.to.wall.(11).using.
four.7SP.x.1/2".self-tapping.screws.
–. Anchor. the. rear. wall. (13). . to. panels. (4-5).
and.(7-8).using.the.eight.7SP.x..1/2"..self-
tapping.screws.supplied.
–. Assemble.the.baseboard..(14),.anchoring.it.
to.panels.(6).and.(9).using.connecting.pins.
–. Proceed.in.the.same.way.to.anchor.the.up-
per.front.panel.(16).in.place.
Fig..10
–. Assemble.the.cover.(10).and.the.door.(15).
2.12
ASSEMBLING THE GAS
ASSEMBLY
Connect.the.gas.assembly.to.the.burner.ma-
nifold.as.shown.in.fig..12..
The.gas.assembly.may.be.assembled.on.the.
right.or.left.side.of.the.manifold..
. 1 6. Upper.front.panel
NOTE:
The position of rings (6) and (9) may
be inverted, though the ring with the
slit must always be positioned on the
side where the gas assembly exits.
Fig..11
51
Tabla de contenido
loading

Tabla de contenido