Sime RS MK II Serie Manual Del Usuario página 50

Ocultar thumbs Ver también para RS MK II Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
2.7
ASSEMBLING THE FLUE
GAS CHAMBER
The.flue.gas.chamber.is.supplied.in.four.pie-
ces.to.be.joined.with.screws.supplied.(fig..7)..
It.is.assembled.by.anchoring.the.right.side.pa-
nel.(2)..to.the.upper.panel.(1)..with.nine.self-
tapping.TE.12E.x.1/2".screws..
The. same. operation. must. be. performed.
on. the. left. side. panel. (3).. Lastly,. anchor. the.
cleaning. panel. in. place. (4).. When. assembly.
is. complete,. position. the. flue. gas. chamber.
above.the..cast.iron.body..Anchor.the.flue.gas.
KEY
1.. Upper.panel
2.. Right.side.panel
3. Left.side.panel
4.. Cleaning.panel.
50
KEY
1.. Plug
2. Flange.ø.35/87
3.. Two-way.cone
4.. Tie.rod.L..900.+.tie.rod.L..980
5.. Flange.ø.50/87
6.. Pipe.segment.
7.. Thrust.bearing
8.. Nut
9.. Tightening.key
chamber.to.the.body.using.the.four.plates.and.
the.four.TE..M8.x.30.screws.supplied.(fig..7/a).
2.8
ASSEMBLING THE WATER
DISTRIBUTOR
The. water. distributor. on. the. return. line. co-
ming. in. from. the. heating. system. is. located.
on.the.right.side.of.the.generator..If.it.is.ne-
cessary.to.move.it.to.the.left.side,.check.that.
the. two. rows. of. holes. in. the. distributor. are.
directed.upwards.and.toward.the.front.of.the.
KEY
1.. TE.M8.x.30.screw
2.. Plate
3.. Washer.ø.8,4
4.. Nut.M8
boiler.(fig..8).
Fig..6
KEY
1.. Boiler.body.
2.. M12.x.60.stud.bolt
3.. Seal.ø.65/95.x.2
4.. Distributor.pipe
5.. DN50.2".collar.flange
6.. Nut.M12
2.9
ASSEMBLING THE BURNER
MANIFOLD
To. assemble. the. burner. manifold,. screw. in.
the.four.TE.M8.x.16.screws.on.the.threaded.
nibs.of.the.two.heads.of.the.boiler.body.(fig..9).
Fig..7
KEY
1.. Burner.manifold
2.. TE.M8.x.16.screws
3.. Right.head
2.10
ASSEMBLING THE BURNERS
Once. the. burner. manifold. has. been. assem-
bled,. insert. the. burners. in. the. combustion.
chamber.one.at.a.time,.ensuring.that.the.slits.
in.the.burner.are.turned.upward..
Push. so. that. the. burner. support. goes. into.
the.hole.in.the.cast.iron.wall.and.divides.the.
Fig..7/a
elements. (fig.. 10).. Anchor. the. burner. to. the.
manifold.with.a.TCB.M5.x.8.screw.
Fig..8
Fig..9
Tabla de contenido
loading

Tabla de contenido