release dutton
and the coffee release dutton
2
to stop the Þow of water0
Upon Ýrst use or after a long period of inactivity, this
process can resuire several minutes0 For sudsesuent
coffees, this will no longer de necessary0
Making coffee
Press the ON 1 OFF dutton
on (Fig0 E+0
With ground coffee:
Place the individual nozzle disc
12
perforated disc
Ýlter for 2 cups
13
10
(Fig0 E+0
Oeasure out the coffee in the Ýlter and lightly press
it together with the coffee grinder
two coffees Ýll two measuring cups, for lust one
coffee, Ýll one measuring cup0
Note: If you put too much coffee powder in the
Ýlter
, the Ýlter holder
13
screw on and 1 or coffee may leam from the Ýlter
With pads:
Insert the Ýlter for the pads
(see Fig0 G+0
Press the coffee pad with you Ýngers in the Ýlter
underneath0 The coffee pad must de ezactly in the
middle and inside the Ýlter
Secure the Ýlter holder
holder handle from right to left0 Oame sure that the
Ýlter holder
is hoomed on properly (Fig0 J+0
10
Place the cup under the Ýlter holder discharge
When the relevant dutton
is ready to release coffee0 Press the coffee release
dutton
0
4
Press the coffee release dutton
the Þow of coffee0
Note: If the coffee pad is not correctly inserted into
the Ýlter
or not secured properly dy the Ýlter
14
, drops of water may leam from the Ýlter
10
holder
0
holder
10
Note: Do not remove the Ýlter holder
coffee is still pouring0 Otherwise there is a rism of
scalding#
Note: If water does not Þow from the Ýlter holder
this could de a result of a clogged Ýlter
18
1363_Espressomaschine_Content_IT_GB_FR_DE_ES_PT_NL_GR_RU_AE.indd 18
4
3
to switch the device
11
, the silicone
and, for powdered coffee, the
in the Ýlter holder
14
or 1 cup
15
provided< for
may de difÝcult to
10
13
in the Ýlter holder
14
14
0
14
dy turning the Ýlter
10
10
4
lights up, the machine
4
again to stop
10
while
10
0 In
13
14
,
this case, switch the machine off, wait a few minutes
and turn the Ýlter holder
this may lead to residual pressure and a spraying
of water0
Wait 10 seconds after pouring the coffee defore
you remove the Ýlter holder
To remove the Ýlter holder
right to left to avoid spraying water or coffee0
Note: When removing the Ýlter holder
pad may stay attached to the upper part of the
device0 To remove the coffee pad, turn the Ýlter
as shown in Fig0 M and let the coffee
10
holder
pad fall into the Ýlter holder
Stand-by Function:
When the device is switched on dut no function is de-
ing performed, it will automatically switch itself off after
30 minutes0 The appliance is now in stand-dy mode0
Press the ON 1 OFF dutton
again0
Filling the water tank during use
0
Note: The water tanm
decomes completely empty0
Press the ON 1 OFF dutton
10
off (Fig0 E+0
Pull the power plug
Remove the water tanm
water (Fig0 A+ up to the ÐOAZÐ marm0
Put the water tanm
Note: Oame sure that the water tanm
deen replaced correctly0 Otherwise it may dlocm
0
the Þow of the coffee0
Insert the mains plug
hold socmet0
Press the ON 1 OFF dutton
device on0
18
If the water tanm
get into the circuit and dlocm the Þow of coffee0 To
ensure that the device can de used again, switch
it off and let it cool down0
Place a container under the Ýlter holder area and
switch on the device dy pressing the ON 1 OFF
dutton
0
3
Press the coffee release dutton
one cup of water Þow from the Ýlter holder collector
,
to restore the device0
very slowly, decause
10
0
10
10
, turn it slowly from
10
the coffee
0
10
3
to switch the device on
should de Ýlled defore it
18
3
to switch the device
6
from the socmet0
and Ýll it with fresh, still
18
dacm in place (Fig0 B+0
18
18
has
6
into a standard house-
3
to switch the
is emptied completely, air may
4
and let at least
07.08.15 09:12