Airzone flexa Maestro Manual De Usuario página 49

5.4.3. Changing a Programme
Once the programme mode and the day or group of days for which the programme is to be
changed has been selected, the following screen will be displayed, waiting for the
programme to be changed to be selected:
Having reached this point, and selecting the programme to be changed - PROG1, PROG2 or
PROG3, there are two ways to proceed:
• By changing a specific value and leaving the rest unchanged. To do this:
Change Start Time:
-
Press the
flashes. Use the arrow keys to change it, then confirm by pressing the AIRZONE icon.
- Change End Time:
Press the
flashes. Use the arrow keys to change it, then confirm by pressing the AIRZONE icon.
Change Temperature setting:
-
Press the Temperature setting and hold it down for 2 seconds, until it flashes. Use the
arrow keys to change it, then confirm by pressing the AIRZONE icon.
• By changing all the programmed values, one after another.
Press the icon for automatic, , to set the programme values sequentially - start time,
-
temperature setting, and end time. Use the arrow keys to change the values, then
confirm by pressing the AIRZONE icon.
To exit programming mode, press the AIRZONE icon.
5.4.4. Delete a programme
First select the programme mode and the day or group of days for which an existing
programme is to be deleted. The following screen will then be displayed, waiting for the
programme (the one to be deleted) to be selected:
At this point, select the programme to be deleted, and then press the ON/OFF icon. To exit
programming mode, press the AIRZONE icon.
icon and then press and hold the time area for 2 seconds, until the time
icon and then press and hold the time area for 2 seconds, until the time
49