Airzone flexa Maestro Manual De Usuario página 47

5.2.1. Selection of the Type of Programming
P1 (zone programme) and P2 (machine programme) can be run simultaneously or
independently.
In order to select the type of programme to be active:
In STOP mode, and with the Master thermostat in OFF, press the STOP
down for 3 seconds, and the type of programme that is active will be shown on the screen.
Use the arrows to select the desired option, and press the AIRZONE key to confirm the
selection.
5.3. Setting and Changing the Time Schedule
* Before any scheduling/ programming can be done, the thermostat's clock must
be set.
The process of setting the clock or changing the time schedule is as follows:
1) With the thermostat in OFF, press the AIRZONE icon.
2) Next press the time digits (if the clock has not been set, the time digits will display --:--,
flashing), to access setting the clock.
3) Use the and
press the AIRZONE icon to confirm.
selection arrows to set the day of the week, the hour and minutes, and
P1 Programming (ZONE) ACTIVATED
(Default value)
P2 Programming (MACHINE)
ACTIVATED
P1 (ZONE) and P2 (MACHINE)
Programming ACTIVATED
key and hold it
Flashing
47