Airzone flexa Maestro Manual De Usuario página 48

5.4. Time Scheduling
5.4.1. Selection of the programming type
To define timed programmes, it is necessary to access the programming menu, by:
1) Setting the thermostat to OFF.
2) Pressing the AIRZONE key and then the clock icon
3) On Master thermostats, the type of programming must be selected ZONE
PROGRAMMING (P1) or MACHINE PROGRAMMING (P2).
(Only if it is Master thermostat, both types of programming are active)
4) The programming mode is selected using the arrows,
pressing the AIRZONE key.
5) Select the day of group of days for which the programme will be established.
6) The programming day is selected using the arrows,
pressing the AIRZONE key, when the selection is flashing.
NOTE: When a group of days is selected, if a programme has been defined for one of the
days in the group, that specific day will not flash, it will remain steady.
5.4.2. Create a Programme
Once the programme mode and the day or group of days to which the programme will apply
has been selected, the following screen will be displayed, waiting for a new programme to be
created:
The clock icon and the selected programme PROG1, PROG2 or PROG3 will flash. The
selected programme can be changed by pressing the corresponding icon - PROG1, PROG2
or PROG3, which will then start to flash.
Once the desired programme has been selected, the programme is defined as follows:
1) Press the ON/OFF icon (if the programme has not been created) or the
programme has been created and is to be changed), to programme the start time, end
time and operating mode or temperature setting for the programme.
2) Firstly, enter the start time, using the arrows, and confirm by pressing the AIRZONE icon.
3) Next set the temperature (Programme P1) or the operating mode (Programme P2), using
the arrows or mode icons, and confirming with the AIRZONE icon.
4) Lastly, enter the end time using the arrows and confirm by pressing the AIRZONE icon.
5) To exit programming mode, press the AIRZONE icon.
48
To programme in P1
.
and , and it is confirmed by
To programme in P2
and , and it is confirmed by
icon (if the