Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. OPERATING MODES
* Only for the Master thermostat
The system's operating mode establishes how the system will operate, working in COOLING,
HEATING, VENTILATION or STOP mode. The operating mode is set in the Master
thermostat and is common for the whole installation, i.e., all the zones will operate in
the same mode.
The following operating modes can be selected:
• STOP
The air conditioning/heating system will remain stopped (OFF) whether or not there
is demand from the other zones. Additionally, all the terminal components (grilles,
dampers, etc), will remain closed.
• VENTILATION
In this operating mode, the system only works with the AC Unit in VENTILATION mode
when one or more of the zones associated with the system generate demand
(T
< T
).
set
room
• COOLING
In this operating mode, the system only works with the AC Unit in COOLING mode, when
one or more of the zones associated with the system are generating demand
(T
< T
).
set
room
• HEATING
In this operating mode, the system only works with the AC Unit in HEATING mode, when
one or more of the zones associated with the system are generating demand
(T
> T
).
set
room
5. THERMOSTAT USE
The thermostat can work in MANUAL mode, or in AUTOMATIC mode, following a time
schedule.
5.1. Manual Operation
MANUAL operation is indicated by the
zone where the thermostat is installed to be activated/ deactivated, and the setting or desired
temperature for that zone to set.
Press the On/Off key to activate/deactivate the air conditioning/heating.
ON/OFF Button
The desired temperature is selected using the selection arrow,
range is 15-30ºC in steps of 0.5ºC, or 64-86ºF in steps of 1ºF.
icon, and allows the air conditioning/heating in the
Fig. 38 - On/Off Icon
and
. The permitted
45
Tabla de contenido
