Storage; Cleaning The Device - Kärcher BR 30/1 C Bp Manual Del Usuario

Storage

CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be stored indoors.
1. Press the battery pack unlocking button, and pull the
battery pack out of the battery mount to avoid dis-
charging the battery pack.
Illustration R

Cleaning the device

Cleaning the device
ATTENTION
Risk of damage and odour development from liq-
uids and damp dirt
Liquids and damp dirt in the device can lead to bacterial
accumulation and odour development when not in use
or in storage.
Damp dirt can dry up in the device and on the cleaning
rollers, and impair the cleaning performance of the de-
vice.
Empty the fresh water tank and waste water tank at the
end of work and before storing the device.
Clean the waste water tank, the sweep bins and the
cleaning rollers.
Allow the clean cleaning rollers to dry in the air, e.g.
mounted on the device on standing vertically. Do not
place wet cleaning rollers on moisture-sensitive surfac-
es, in closed containers or cupboards.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Wipe off dirt and detergent residues on the housing
with a damp cloth.
4. Remove the fresh water tank, empty it and put it
back in the device (see chapter Filling the fresh wa-
ter tank).
Cleaning the waste water tank
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
It is recommended to clean the device after each appli-
cation.
Clean the waste water tank regularly.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Empty the waste water tank (see chapter Emptying
the waste water tank).
4. Pull the lid handle and remove the lid.
Illustration T
5. Clean the waste water bowl and the lid with tap wa-
ter.
Illustration U
6. Allow the waste water bowl and the lid to dry or dry
them with a lint-free cloth.
7. Assemble the waste water tank in reverse order and
insert it into the device.
10
Cleaning the sweep bins
ATTENTION
Adhering dirt deposits
Adhering dirt deposits can damage the device in the
long term.
It is recommended to clean the device after each appli-
cation.
Clean the sweep bins regularly.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Remove the waste water tank (see chapter Empty-
ing the waste water tank).
4. Remove the sweep bins.
a Disengage the sweep bins to the side and swing
them forward.
b Remove the sweep bins to the side.
Illustration V
5. Clean both sweep bins under running water.
Illustration W
6. Remove the cleaning brush from the cover of the
waste water tank, and remove any dirt stuck in the
combs (shown with a frame).
7. Install the two sweep bins in the reverse order.
Cleaning the cleaning roller
ATTENTION
Detergent residues in the cleaning rollers
Foaming
Wash the cleaning rollers under running water or wash
the cleaning rollers in the washing machine each time
after use.
ATTENTION
Damage caused by washing the cleaning rollers
with fabric softener or using a tumble dryer
Damage to the microfibres
Do not use fabric softener when washing the cleaning
rollers in the washing machine.
Do not dry the cleaning rollers in a clothes dryer.
Do not bleach or iron the cleaning rollers.
1. Press the ON/OFF switch.
Illustration L
The device switches off.
2. Bring the device into the parking position (see chap-
ter General notes on operation).
3. Reach into the recessed grips on the side of the
cleaning rollers and unscrew the cleaning rollers.
Illustration X
4. Clean the cleaning rollers under running water or
wash them in the washing machine at max. 60°C.
Illustration Y
5. Clean the roller drives with a moist cloth.
6. Turn the cleaning rollers on the roller drives. Pay at-
tention to the colour assignment of the inside of the
roller and the roller drive (green to green and blue to
blue).
Illustration Z
7. Allow the rollers to dry mounted on the device or
standing vertically.
English