Reversing The Lid Opening Direction; Connecting The Cooler - Dometic CFX3 Serie Instrucciones De Uso

Ocultar thumbs Ver también para CFX3 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 101
CFX3
7.3

Reversing the lid opening direction

CFX3 55, CFX3 55IM, CFX3 100
➤ Proceed as shown (fig. 5, page 5).
CFX3 75DZ, CFX3 95DZ
➤ Proceed as shown (fig. 6, page 6).
7.4

Connecting the cooler

A
NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse
inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
Connecting to a battery
➤ Proceed as shown (fig. 7, page 7).
Connecting via extended DC hard-wiring (only CFX3 100)
➤ Proceed as shown (fig. 8, page 8).
Connecting to an AC power supply
D
DANGER! Electrocution hazard
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your cooler on board a boat from a AC power
supply, you must install a residual current circuit breaker between the
AC power supply and the cooler.
Seek advice from a trained technician.
➤ Proceed as shown (fig. 9, page 9).
EN
Operation
27
Tabla de contenido
loading

Tabla de contenido