Checks To Be Carried Out Before Connecting The Machine - Master MT Dry 800 Manual De Uso Y Mantenimiento

The main body of the machine can be tilted to facilitate raw material loading and unloading operations. If you face
the main control panel of the machine, the inclination of the machine will be to the left side by default. If you want
to tilt the main body to the opposite side, you must place the levelling stop on the opposite side of the bench, as
shown in the following image.
Finally, connect the power cable of the machine to the electricity supply. IMPORTANT: Make sure that the electrical
cable is perfectly positioned, without forming loops that could cause tripping.

Checks to be carried out before connecting the machine

A series of necessary checks are described below before connecting the equipment to the electrical current and
starting work:
+ Check that the barrel is aligned and that the slots at its ends are correctly supported on the rollers,
as shown in the following image.
+
Check that the two covers are correctly positioned.
Verify that the machine is in run status (white LED).
+
24
End slot of the barrel
Roller
www.masterproducts.es