Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Basic safety instructions
Safety simbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life.
Ignoring the instructions can lead to serious harmful effects causing possible injury with danger
of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life.
Ignoring the instructions can lead to damage to the product and to the user.
INFORMATION
This symbol indicates suggestions and especially practical information can be found below.
This symbol indicates suggestions and practical information for appropriate handling of Master
Products equipment. Ignoring this advice could result in misuse of the article.
Safety for the Operator
The plants to be treated with the machine must be dry, either herbaceous and/or semi-woody. Processing
+
any plant of a different nature can cause injury to the user and the machine.
When using the machine, always wear gloves and safety glasses. Never work with loose clothing, loose hair,
+
bracelets, pendants, etc.
+
Never work under the influence of alcohol and/or drugs.
+
Use the machine only if it is in perfect condition, otherwise users will be exposed to risks.
Safety devices such as switches, grids, guards, hatches, racks must not be dismantled under any circumstances.
+
Before carrying out any maintenance action on the machine, it must be switched off and disconnected from the
+
electricity supply.
Who can use the MT Dry 800
The MT Dry 800 must only be used by staff who have read and understood the use and maintenance manual. If it is
used by untrained staff or is not used correctly, users will be exposed to unnecessary risks.
Machine repair
Only qualified staff can dismantle, repair and install new parts. In the event that the product is in the warranty period,
it can only be dismantled by Master Products staff without voiding the warranty.
How to stop the machine
The MT Dry 800 machine shuts down, under any circumstance, when the red stop switch (OFF) on the control panel
on the front of the machine and/or the emergency stop switch, located in the same place, is pressed. It also stops
if the swing hatch is opened.
Before carrying out any maintenance work on the machine, it must be switched off and disconnected from the
electricity supply.
The machine must be switched off and disconnected from the electricity supply immediately in case of abnormal
operation.
www.masterproducts.es
21
Capítulos
Tabla de contenido
