Master MT Dry 800 Manual De Uso Y Mantenimiento página 23

Setting-Up
Assembling the MT Dry 800
The MT Dry 800 is delivered completely protected and boxed. First of all, open the box and check all the
material received. It is recommended to place the machine and all the supplied components on a flat
surface with enough space for assembly.
Next, place the boxes (B), as shown in the following image, in the lower part of the equipment (A) where
there are three supports for this purpose. Check that the boxes are well centred and supported. The
cut of the product coming from the barrel will be deposited in the boxes with a capacity of 55 litres
each.
Place the two side covers (C) at the ends of the barrel so that the product remains inside it with the machine running.
www.masterproducts.es
23