Electrical Safety; Start-Up - Parkside PHD 150 C2 Traducción Del Manual De Instrucciones Original

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

check that the required electrical pro-
tection measures are in place.
Do not operate the equipment if the
mains cable, water supply or other im-
portant parts such as the high-pressure
hose or gun are damaged/leaking.
Protect the pressure cleaner from frost
and dry running.
High-pressure hoses, fittings and
couplings are important for machine
safety. Use only high-pressure hoses,
fittings and couplings recommended by
the manufacturer.
Use only original accessories and do
not carry out conversion work on the
equipment.
Please read the notes in the operating
instructions on the topic of "mainte-
nance and cleaning". Any measures
above and beyond these, particularly
opening the equipment, are to be car-
ried out by an authorised electrician.
In the case of repairs, always contact
our service centre.

Electrical safety:

Caution: to avoid accidents
and injuries from electric
shocks:
The plug and socket of an extension
cable must be water-tight!
Unsuitable extension cables can
be dangerous as people can be
harmed by an electric shock!
Protect the electric plug connections
against moisture.
If there is a risk of flooding, fix the
plug connections in an area that is safe
from flooding.
Ensure that the mains voltage matches
the specifications on the rating plate.
Connection to the mains must be
carried out by an experienced electri-
cian and meet the requirements of
IEC 60364-1.
The electrical installation shall be ac-
cording to national wiring rules.
The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
Fuse: at least 13 ampere.
Before each use, check the equipment,
cable and plug for damage.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
Do not pull the plug from the socket by
the cable. Protect the cable from heat,
oil and sharp edges.
Do not carry or fix the equipment by
the cable.
Use only extension cables that are pro-
tected from spray water and designed
for outdoor use. Always fully unroll a
cable drum before use. Check the ca-
ble for damage.
Before any work on the equipment,
during work breaks and in the case
of non-use, remove the plug from the
socket.
The cross-section of the power sup-
ply cable must not be less than
2 x 2,5 mm².
Wear sturdy footwear to protect
against electric shock.
To protect against electric shock, oper-
ate the equipment only in an upright
position.

Start-up

In keeping with current regulations
a pressure cleaner must never be
operated off the drinking water
mains supply without a controllable
backflow preventer. A suitable back-
GB
MT
47
Tabla de contenido
loading

Tabla de contenido