Ryobi PPW-3000 Manual De Utilización página 25

GB
F D E I
FEATURES
39. Slot on trigger
40. Lock out
41. Collar on extension spray wand
42. Air filter cover
43. Air filter
44. Wire mesh
45. Container (Not provided)
46. Oil plug
47. Fuel cup
ASSEMBLY
Refer to figure 2 - 8.
■
Remove and discard the clear cap securing
■
the operator's manual bag to the pump
breather tube.
WARNING:
If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to do
so could result in possible serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
NOTE: Do not start the pressure washer until the engine
has been filled with oil and all hoses are connected.
Running this machine without oil will damage the engine
while running it without water will damage the high
pressure pump.
CAUTION:
Any attempt to start the engine without adding oil
will result in engine failure.
WARNING:
Petrol and its vapors are highly flammable and
explosive. To prevent serious personal injury and
property damage, handle petrol with care. Keep
All manuals and user guides at all-guides.com
P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT
English
away from ignition sources, handle outdoors
only, do not smoke while adding fuel, and wipe
up spills immediately.
OPERATION
WARNING:
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting inpossible serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal
injury.
WARNING:
Do not direct discharge stream at persons.
Failure to heed this warning could result in
serious injury.
Applications
This product has been designed for the purposes listed
below:
Removing dirt and mold from decks, cement patios,
■
and house siding
Cleaning cars, boats, motorcycles, and grills.
■
STARTING/STOPPING THE PRESSURE WASHER (
Fig 9.)
CAUTION:
Do not run the pump without the water supply
connected and turned on.
Before starting the engine, connect all hoses and check
all fluids (oil and petrol). Turn the garden hose on then
squeeze the trigger. This relieves air pressure caused by
turning on the water. Hold the trigger until a steady
stream of water appears. This makes it easier to pull start
the engine.
To start an engine that is cold or has run dry:
Close the fuel valve (4) before filling the fuel tank (5).
■
Fill the fuel tank (if necessary).
■
Connect the garden hose to the pump and turn on the
■
water supply.
Open the fuel valve.
■
Place the ON/OFF switch in the ON ( l ) position (35).
■
Push the choke lever to position A (closed) (36).
■
17
LV SK BG