Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6.3. Finding and Troubleshooting Problems
Problem
Pump does not work
If the measures shown above do not solve your problem,
please contact the producer.
6.4. Notes on Personal Protective Gear
Wear appropriate protective gear (e.g. safety glasses, gloves, apron etc.) when handling
solvents.
7. Inspection / Maintenance_____________________________
7.1. Inspection
An experienced trained technician should inspect the unit at least every 12 months.
The examniation of the Parts Cleaning Devices, as stationary or moveable electrical devices,
has to be effected by the operator.
7.2. Maintenance
Depending on the type of application, the degree of contamination and duration of use, the
cleaning liquid must be exchanged by means of changing the drum. The unit must be
disconnected from the power supply before the drum is changed. Clean the unit regularly using
a cloth and/or cleaning solution. Original replacement parts must be ordered from the producer,
otherwise the warranty will be void.
8. Spare Parts and Accessories_________________________
The spare parts and accessories list for parts cleaning devices Types F and F2:
Article No.
2222040
2222018
2222062
2222061
2222008
2222009
2222011
2222024
2221012
2222033
2222035
2222058
2222012
accessory
9700014
accessory
Operating Instructions Parts Cleaner Type F/F2 (02/2010/EN)
Cause
•
No power
•
Pump is defective
Article Name
Self-priming pump
Support grate (peforated sheet) – for Type F only
Support grate (lamellar grate) – for Type F only
Support grate (lamellar grate) – for Type F2 only
Cleaning brush, fine – 50 mm bristles
Cleaning brush, coarse – 50 mm bristles
Cleaning brush, long bristles – 80 mm
Safety foot switch
Return hose
Return hose connection piece, ¾"
Thread plug 2"
Brush hose, 1,2 m
Special parts cleaning gloves (solvent-resistant)
Operating Instructions for Parts Cleaners
Solution
•
Check whether unit is plugged in
•
Replace pump
8
Page
Capítulos
Tabla de contenido
Solución de problemas
