Tabla de contenido
Replacing the aerator rod
Preparatory work:
Remove ClearWave. (→ ClearWave Disassembly and cleaning)
How to proceed:
1. Pull the aerator rod out of the clamp holder.
2. Pull the hose off the aerator rod and fit it to the new aerator rod.
– Fasten the hose with a cable tie on the connection.
3. Push the aerator rod into the clamp holder.
Storage/overwintering
Decommissioning depends on whether or not the unit is protected against freezing.
The unit is protected from freezing temperatures (e.g. stored in a garage or other enclosure)
The unit can be operated as long as the water temperature does not drop below +4 °C.
The unit is not protected from freezing temperatures (e.g. outdoor installation)
Shut down the unit at water temperatures below +8 °C or at the latest when freezing tempera-
tures are expected.
Drain the water remaining in the unit, in the hoses, pipes and connections as much as possi-
ble.
Open all slide valves to prevent water from pooling.
Cover the container to prevent rain water from entering.
Protect any lines and slide valves from which you cannot drain the water against freezing.
EN
Proficlear0220
23
Tabla de contenido
