Saving Energy - Dometic C154F Instrucciones De Montaje Y De Uso

C154F, D154F
• Do not cover the shelves with aluminum foil or any other objects, as this obstructs
the air circulation.
• After a power cut or if the wine cooler has been switched off, wait 3 to 5 minutes
before switching on the wine cooler again.
➤ Position the bottles as shown in fig. 0, page 9.
7.3

Saving energy

• Only open the wine cooler as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.4 Switching on and off
➤ To switch on and off, press the
7.5 Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the wine cooler as
often and for as long as necessary. Store the wine bottles in such a way that the
air can still circulate well.
• Adjust the temperature to the quantity and type of the wine bottles.
Setting the unit (°C or °F)
You can select whether the temperature is displayed in Fahrenheit or Celsius.
➤ Press the
button for 5 seconds (fig. a, page 9).
✔ The unit is converted and the display shows the temperature in the selected unit.
Increasing and decreasing the temperature
The temperature can be set between 5 °C and 22 °C for the upper zone and
between 5 °C and 22 °C for the lower zone.
➤ Press the corresponding
page 9).
EN
button for at least 5 seconds.
button to set the temperature (fig. b,
or
Operation
19