Using the device
After a power cut or if the appliance has been switched off, wait 3 to 5 min-
utes before switching on the appliance again.
The following variants are possible:
A25G (fig. 0, page 7): 5 storage surfaces:
– 4 mesh shelves
– 1 base shelf
A192G/A192D (fig. a, page 7): 6 storage surfaces
– 3 pull-out shelves
– 2 storage shelves
– 1 base shelf
8.2
Energy saving tips
Do not open the device more often than necessary.
Do not leave the door open for longer than necessary.
Clean dust and dirt from the condenser at regular intervals.
8.3
Using the device
Brief instructions
Function
Switch the device on
Switch off the device
Unlock the keypad
Display the set temperature
Raise temperature by 1 °C or 1 °F
Lower temperature by 1 °C or 1 °F
Setting the temperature
The temperature on the interior can be set between 8 °C and 18 °C (46 °F
and 64 °F).
➤ Hold down the corresponding buttons
➤ Press the corresponding buttons
32
Press buttons
I/O
I/O
or
or
< 1 s
< 1 s
until the display flashes.
or
to set the temperature.
or
MaCave
> 5 s
< 1 s
EN