Shutdown; Maintenance And Care - Kärcher KM 100/100 R P Manual

Turn off the appliance
 Set programme switch to step 1 (driv-
ing). The side brush and roller brush are
raised.
 Turn ignition key to "0" and remove it.
Note:Once the machine has been switched
off, the dust filter is shaken automatically
for approx. 15 seconds. Do not open the
machine hood during this period.
Note: The machine has been fitted with an
automatic parking brake that is activated as
soon as the engine is switched off and the
driver leaves his seat.
KM 100/100 R P only
 Close fuel cock.
KM 100/100 R LPG only
 Close gas drawing valve by turning it in
clock-wise direction.
Transport
Danger
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Turn ignition key to "0" and remove it.
 Secure the wheels of the machine with
wheel chocks.
 Secure the machine with tensioning
straps or cables.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Note:Observe markings for fixing points on
base frame (chain symbols). When loading
or unloading the machine, it may only be
operated on gradients of max. 18%.
24
KM 100/100 R P only
 Close fuel cock.
 Empty fuel tank.
KM 100/100 R LPG only
 Close gas drawing valve by turning it in
clock-wise direction.
 Remove the gas bottle and dispose of
according to the applicable rules and
regulations.
Storage
Danger
Risk of injury and damage! Note the weight
of the appliance in case of storage.

Shutdown

If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:
 Park the sweeper on an even surface.
 Set programme switch to step 1 (driv-
ing). The roller brush and side brushes
are raised to prevent the bristles being
damaged.
 Turn ignition key to "0" and remove it.
 Lock the sweeper to ensure that it does
not roll off.
 Clean the inside and outside of the
sweeper.
 Park the machine in a safe and dry
place.
KM 100/100 R P only
 Fill fuel tank and close fuel cock.
KM 100/100 R LPG only
 Close gas drawing valve by turning it in
clock-wise direction.
 Remove the gas bottle and dispose of
according to the applicable rules and
regulations.
All motor models:
 Change the engine oil
 Unscrew spark plugs and pour approx.
3 cm³ of oil into the spark plug hole.
Crank the engine several times before
replacing the spark plug. Screw in the
spark plug.
 Disconnect battery.
 Charge battery approx. every 2 months.

Maintenance and care

General notes
 First switch off the appliance, remove
the key and remove the battery plug or
disconnect the battery before perform-
ing any cleaning or maintenance tasks
on the appliance, replacing parts or
switching over to another function.
 Pull out the battery plug or clamp the
battery while working on the electrical
unit.
Maintenance work may only be carried
–
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety
regulations.
EN
7
-
Mobile appliances used for commercial
–
purposes are subject to safety inspec-
tions according to VDE 0701.
Use only roller brushes/ side-brushes
–
that are provided with the appliance or
specified in the Operations Manual.
The use of other roller brushes/ side-
brushes can affect the safety of the ap-
pliance.
Cleaning
Caution
Risk of damage! Do not clean the appliance
with a water hose or high-pressure water
jet (danger of short circuits or other dam-
age).
Cleaning the inside of the machine
Danger
Risk of injury! Wear dust mask and protec-
tive goggles.
 Open the hood, insert retaining rod.
 Clean machine with a cloth.
 Blow through machine with com-
pressed air.
 Close cover.
Note:The dust filter can be rinsed with wa-
ter. Dry the filter completely before reusing
it.
External cleaning of the appliance
 Clean the machine with a damp cloth
which has been soaked in mild detergent.
Note: Do not use aggressive cleaning
agents.
Maintenance intervals
Note: The elapsed-time counter shows the
timing of the maintenance intervals.
Maintenance by the customer
Daily maintenance:
 Check the sweeping roller and the side
brush for wear and wrapped belts.
 Check tyre pressure.
 Check function of all operator control el-
ements.
Weekly maintenance:
 Check for smooth running of the Bow-
den cables and the moveable parts
 Check the sealing strips in the sweep-
ing area for position and wear.
 Check dust filter and clean filter box, if
required.
 Check the vacuum pressure system.
Maintenance to be carried out every 100
operating hours:
 Check function of seat contact switch.
 Check tension, wear and function of
drive belts (V-belt and circular belt).
Maintenance following wear:
 Replace sealing strips.
 Replace roller brush.
 Replace side brush.
Note: For description, see section on Main-
tenance work.
Note:Where maintenance is carried out by
the customer, all service and maintenance
work must be undertaken by a qualified
specialist. If required, a specialised Archer
dealer may be contacted at any time.