Special Tool; Inspection Schedule - TOHATSU EverRu MX 18E2 Manual De Servicio

Maintenance

1. Special Tool

1 1
Compression Gauge
P/N. 3AC-99030-0
Measuring compression
pressure

2. Inspection Schedule

tem
Carburetor
Fuel filter
Fuel System
Piping/Hose
Fuel tank
Spark plugs
gnition
gnition timing
Starting
Starter rope
System
Compression
Engine
pressure
Propeller
Lower Unit Gear oil
Water pump
Thermostat
Bolt and Nuts
Sliding and Rotating Parts.
Grease Nipples
Outer Equipment
Anode
3-2
Servicing nterval
Every 100
10 hours 50 hours
hours or
or or
6 months
1 month 3 month
● ●
● ●
●
●
●
● ●
● ●
●
●
●
●
●
●
●
●
●
Action
Strip, clean and adjust.
●
Adjust idling.
Check and clean or
●
Replace if necessary.
Check and Replace if
●
necessary.
●
Clean.
Check gaps. Remove
●
carbon deposits or Replace
if necessary.
●
Adjust timing.
●
Check for wear or damage.
nspection.
Check for bend blades,
●
damage, wear.
Change or replenish-oil and
●
check for water leaks.
● Check for wear or damage.
Foreign substance in the gap,
●
defective operation.
●
Retighten.
●
Apply and pump in grease.
●
Check for corrosion.
Check for corrosion and
●
deformation.
GB
Remarks
Gap
0.9-1.0 mm
(0.035-0.039 in)
ATDC3¡-BTDC25¡
Every 200 hours or
12 months.
Gear oil
(GL5, SAE80-90)
Replace impeller
every 12 months.
Opening temp.: 52¡C
Valve Lift : 3.0 mm (65¡C)
Replace if necessary.
2st X18E2 2012