Cleaning And General Maintenance Work; Replacing The Air Filter; Maintaining The Spark Plug - FLORABEST FBM 190 A1 Traducción Del Manual De Instrucciones Original

Wear gloves when handling the
blade.
For cleaning and maintenance
work, also observe the Briggs &
Stratton instruction manual sup-
plied.
We recommend contacting an au-
thorised Briggs & Stratton dealer for
maintenance work on the engine.
Cleaning and General Mainte-
nance Work
Tip the Equipment:
To clean the underside of the equipment,
tip the equipment backwards on the upper
handle bar (2).
To prevent the equipment from tipping
back,
- remove the grass collection box
( 20) if it is installed,
- adjust the cutting height to position 7
(33) and
- set the upper handle bar (2) to around
5° in the direction of the equipment
(see "installing the handle bar").
Do not squash the Bowden cables (4)
when doing this.
Risk of injury if the equipment
tips back.
To prevent operating fluids from
leaking out, do not lie the equip-
ment on its side.
• Always keep the equipment clean. To
clean, use a toothbrush or cloth but no
corrosive cleaning agents or solvents.
Do not use water to clean the engine as
it could contaminate the fuel system.
• After mowing, remove plant remains
that are stuck to the equipment by us-
ing a piece of wood or plastic. Clean
the vent holes, ejection hole and
blade area especially. Do not use hard
or pointed objects, which could dam-
age the equipment.
• Oil the wheels from time to time.
• Before each use, check the lawnmow-
er for obvious defects such as loose,
worn or damaged parts. Check that
all nuts bolts and screws are sitting
firmly.
• Check covers and guards for damage
and that they are sitting correctly. Re-
place if necessary.

Replacing the Air Filter

Do not operate the equipment
without the air filter otherwise dust
and dirt will get into the engine and
result in damage to the machine.
1. Loosen the screw on the air fil-
ter cover (15) and flip open the
cover.
2. Remove the air filter (14).
3. Replace the air filter with a new
filter (see "replacement parts").
4. To install, insert the new air filter
(14) in the air filter cover (15)
(see arrow
5. Flip the air filter cover closed
and screw it back together.

Maintaining the Spark Plug

A worn spark plug or a spark gap
that is too large will result in a re-
duction of engine performance.
1. Disconnect the spark plug con-
nector (12) from the spark plug
by simultaneously pulling and
GB MT
on the air filter).
69