Tabla de contenido
Idiomas disponibles
Idiomas disponibles
j
Take the appliance back into use exclusively
when it is undamaged.
Transporting / storing the
Q
mower
c Danger!
J
Switch the appliance off! Wait until the curved
blade bar
comes to a complete stop.
21
J
Separate the appliance from the power source!
Transporting
j
Push the appliance by the steering shaft handle
or carry it by the carrying handle on the
1
housing
.
14
Storage
j
Store the appliance in a dry area, protected
from non-permitted use.
j
To save space, fold the upper shaft handle
down. For this, loosen the two connecting
screws
(see Fig. E).
8
j
Take steps to ensure the power cable
trapped or squeezed.
j
Do not place any objects on the appliance.
Maintenance and Cleaning
Q
Maintenance
Q
j
Before every use, always check by visual control:
- the power cable
6
for damages, especially to the protective
isolation covering (e.g. tears, breaks).
- the curved blade bar
bolt
for wear and tear.
22
- for faultless assembly.
j
Use the appliance only when it is complete,
correctly assembled and without visible damage.
Changing the curved blade bar
j
Remove the grass box
ance on its side.
j
To counter the rotary movement caused by
2
is not
6
and the extension cable
and the securing
21
.
21
and lay the appli-
10
Operation / Maintenance and Cleaning
unscrewing, place a restrainer (screwdriver or
similar) into the insert opening.
j
Unscrew the securing bolt
shaft with an SW 13 mm spanner.
j
Remove the curved blade bar
j
Firmly affix the new curved blade bar
the securing bolt
to the drive shaft.
The marking for the direction of rotation on the
curved blade bar must be visible (see Fig. F).
j
Remove the restrainer and bring the appliance
back into an upright position.
Cleaning
Q
Appliance upper surfaces
j
Directly after mowing, thoroughly remove all
grass remnants and grime.
j
Pay particular attention to cleaning the venti-
lation slits in the housing
j
Use a cloth and a hand brush.
Appliance lower surfaces
j
Remove the grass box
ance on its side.
j
Pay particular attention to cleaning the curved
blade bar
and its surroundings.
21
j
Use a hand brush as well as a wood or plastic rod.
j
Under no circumstances should you use water,
solvents or detergents!
from the drive
22
.
21
21
and the washer back on
22
.
14
and lay the appli-
10
GB/MT
with
37
Capítulos
Tabla de contenido
Solución de problemas
