General Provisions; General Information And Safety; Scope Of The Manual; Glossary And Terminology - Mitsubishi Electric MULTIDENSITY 009 Manual De Instalación, Uso Y Mantenimiento

página de 200

/ 200
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

MULTIDENSITY

Before carrying out any operation on the machine, you must

carefully read this manual and make sure you understand all

the instructions and information given.

Keep this manual in a known and easily accessible place

to refer to as necessary during the entire lifespan of the

CONTENTS

..........

GENERAL PROVISIONS.................................................................................. 16

.....

1.1

GENERAL INFORMATION AND SAFETY ...................................................... 16

.....

1.1.1

SCOPE OF THE MANUAL ..................................................................... 16

.....

1.1.2

GLOSSARY AND TERMINOLOGY ....................................................... 16

.....

1.1.3

ATTACHED DOCUMENTATION ........................................................... 17

.....

1.1.4

SAFETY REGULATIONS ....................................................................... 17

.....

1.1.5

PRECAUTIONS AGAINST RESIDUAL RISKS ..................................... 17

.....

1.1.6

LIST OF MACHINE INTERNAL SYMBOLS ........................................... 18

.....

1.1.7

ACOUSTIC DATA ................................................................................... 18

.....

1.1.8

PROCEDURE FOR REQUESTING SUPPORT .................................... 18

.....

1.2

MACHINE IDENTIFICATION ............................................................................ 18

.....

1.2.1

NOMENCLATURE .................................................................................. 18

.....

1.2.2

IDENTIFICATION PLATE ....................................................................... 18

.....

1.3

STORAGE TEMPERATURE ............................................................................ 19

.....

1.4

OPERATING RANGE ....................................................................................... 19

.....

1.5

CONFIGURATIONS .......................................................................................... 19

.....

1.5.1

M-MROW VERSION ............................................................................... 19

.....

1.5.2

M-MRAC VERSION ................................................................................ 19

.....

1.6

DESCRIPTION OF THE MAIN COMPONENTS .............................................. 19

.....

1.7

RECEIPT, TRANSPORT AND HANDLING ..................................................... 20

..........

INSTALLATION ................................................................................................ 20

.....

2.1

DISASSEMBLY OF THE MACHINE PANELS ................................................ 20

.....

2.2

INSTALLATION ................................................................................................ 20

.....

2.2.1

POSITIONING ........................................................................................ 20

.....

2.3

COOLING CIRCUIT CONNECTION TO THE CONDENSING UNIT .............. 21

.....

2.3.1

TYPE OF COPPER TO BE USED FOR THE COOLING LINE............. 21

.....

2.3.2

GENERAL INFORMATION FOR THE COMPLETION OF THE

COOLING LINE .......................................................................................................... 21

.....

2.3.3

CONNECTION OF THE PIPES TO THE MACHINE ............................. 21

.....

2.3.4

BRAZING OF PIPING............................................................................. 22

.....

2.3.5

PIPING LENGTH AND REFRIGERANT CHARGE ............................... 22

.....

2.3.6

ADDITIONAL REFRIGERANT CHARGE FOR STANDARD

DIAMENTER PIPING BASED ON LENGTH ............................................................. 22

.....

2.4

HYDRAULIC CONNECTION OF THE CONDENSATE DRAIN ...................... 22

.....

2.5

ELECTRICAL CONNECTIONS ........................................................................ 23

.....

2.5.1

MACHINE POWER SUPPLY ................................................................. 23

.....

2.5.2

AUXILIARY ELECTRICAL CONNECTIONS ......................................... 23

.....

2.5.3

P-LAN ...................................................................................................... 24

.....

2.5.4

M-NET ..................................................................................................... 24

..........

ACCESSORIES ................................................................................................. 25

.....

3.1

HUMIDIFIER ...................................................................................................... 25

.....

3.2

7 INCHES DISPLAY.......................................................................................... 26

.....

3.3

NETWORK ANALYZER ................................................................................... 26

.....

3.4

DUAL POWER SUPPLY ................................................................................... 26

.....

3.5

ELECTRIC HEATERS ...................................................................................... 26

.....

3.6

FIRE/SMOKE DETECTOR ............................................................................... 26

..........

PRE-COMMISSIONING .................................................................................... 26

.....

4.1

BEFORE STARTING THE MACHINE .............................................................. 26

.....

4.2

FIRST START.................................................................................................... 26

.....

4.3

USER INTERFACE ........................................................................................... 27

.....

4.3.1

USER TERMINAL ................................................................................... 27

.....

4.3.2

BUTTONS GENERAL FUNCTIONS ...................................................... 27

.....

4.3.3

KEY LED MANAGEMENT ...................................................................... 27

..........

START ............................................................................................................... 27

.....

5.1

MACHINE START ............................................................................................. 27

.....

5.2

START ............................................................................................................... 27

..........

METHOD OF USE ............................................................................................. 27

.....

6.1

USE PROVISIONS AND WARNINGS.............................................................. 27

.....

6.2

DESCRIPTION OF CONTROLS....................................................................... 27

.....

6.3

EMERGENCY STOP ......................................................................................... 27

.....

6.4

EXTENDED MACHINE INACTIVITY ................................................................ 27

.....

6.5

START-UP AFTER EXTENDED MACHINE INACTIVITY ............................... 27

..........

FIRST DIAGNOSTICS ...................................................................................... 28

.....

7.1

WHAT TO DO IF ... ........................................................................................... 28

..........

MAINTENANCE ................................................................................................ 28

.....

8.1

MAINTENANCE INSTRUCTIONS .................................................................... 28

.....

8.2

SCHEDULED MAINTENANCE ........................................................................ 28

.....

8.3

GENERAL MAINTENANCE WORK TABLE ................................................... 28

.....

8.4

CLEANING AND / OR REPLACING THE AIR FILTERS ................................ 29

.....

8.5

EXTRAORDINARY MAINTENANCE ............................................................... 29

..........

DISPOSAL OF THE MACHINE ........................................................................ 29

GENERAL PROVISIONS

1.1

GENERAL INFORMATION AND SAFETY

UM_MULTIDENSITY_00_Z_09_20_ML

unit.

1.1.1

SCOPE OF THE MANUAL

This manual, which is an integral part of the machine (1), was prepared by the Manufacturer

to provide the necessary information to all those who are authorised to interact with it during

its life span: Buyers, System Designers, Carriers, Handling Operators, Installers, Expert

Operators, Specialist Technicians and Users.

As well as adopting a code of good practice, the recipients of the manual must read the

information with care and apply it scrupulously. Taking a little time to read this information

can help avoid risks to the health and safety of persons as well as prevent financial losses.

The information was written by the Manufacturer in English and is referred to as the

"ORIGINAL INSTRUCTIONS". This information is also available as the "TRANSLATION OF

THE ORIGINAL INSTRUCTIONS" and can be translated into other languages to meet

legislative and/or commercial requirements. The information is valid even if the machine in

your possession is not exactly the same as the one referred to.

Keep this manual in a known and easily accessible place to refer to as necessary.

The Manufacturer reserves the right to modify the product without prior notice.

Some symbols are used to highlight some parts of the text that are of particular importance.

These are described below.

(1)

in the interest of clarity, this term is used as defined in the Machinery Directive.

DANGER

Indicates situations of grave danger which, if ignored, can

seriously endanger the health and safety of people.

OBLIGATION

Indicates that it is necessary to act in an appropriate manner in

order not to put at risk the health and safety of people and not

cause financial damage.

INFORMATION

Indicates technical information of particular importance which

should not be neglected.

1.1.2

GLOSSARY AND TERMINOLOGY

There are some recurring terms in the manual which are described below in more detail.

Manufacturer: this is the company that has designed and built the machine in line with

current laws, implementing all the good construction rules, and paying attention to the

health and safety of people interacting with the machine.

Buyer: the person responsible for making the purchase who must supervise the

organisation and assignment of duties to ensure that everything is done in compliance with

the applicable laws.

Owner: Legal representative of the company, a body, or a natural person who owns the

plant where the machine is installed and is responsible for checking compliance with all the

safety rules in this manual and the national regulations in force.

Designer: a competent specialist person duly appointed and authorised to draw up a

project that takes into account all the legislative and regulatory aspects and code of good

practice that apply to the system as a whole. In any case, as well as comply with the

instructions provided by the machine Manufacturer, the designer must consider all the

safety aspects for all those persons who will have to interact with the system during its

expected life span.

Installer: specialist competent person duly appointed and authorised to set up the machine

or system according to the project specifications and the recommendations of the machine

Manufacturer and in compliance with the laws on safety at work.

User: person authorised to manage use of the machine in compliance with the "instructions

for use" and the laws in force concerning safety at work.

Carriers: the persons who take the machine to the destination in a suitable means of

transport. They must stow and position the machine in a suitable way to ensure that it

cannot move suddenly during transfer. When using devices for loading and unloading, they

must observe the instructions that can be found on the machine to ensure their own safety

and that of those people with whom they interact in the process.

Handling operators: those who duly set up the machine and implement all the applicable

measures so that it can be handled in a safe and correct manner. They are also those

persons who, upon receipt of the machine, move it to the place of installation according to

the instructions which can be found on the machine. All the above employees must have

adequate skills and observe the instructions to ensure their own safety and that of those

people with whom they interact in the process.

Maintenance person: The person authorised by the owner to carry out on the machine all

operations of regulation and checking expressly indicated in this manual, and which must

be strictly followed. His/her work will be limited only to what is clearly allowed.

English

ORIGINAL INSTRUCTIONS

Tabla de Contenido

Capítulos

Tabla de contenido

Este manual también es adecuado para:

Multidensity 015 Multidensity 025

General Provisions; General Information And Safety; Scope Of The Manual; Glossary And Terminology - Mitsubishi Electric MULTIDENSITY 009 Manual De Instalación, Uso Y Mantenimiento

Idiomas disponibles

GENERAL PROVISIONS

GENERAL INFORMATION AND SAFETY

SCOPE OF THE MANUAL

GLOSSARY AND TERMINOLOGY

Capítulos

Manuales relacionados para Mitsubishi Electric MULTIDENSITY 009

Contenido relacionado para Mitsubishi Electric MULTIDENSITY 009

Este manual también es adecuado para:

Tabla de contenido