Becken BECM2493 Manual De Instrucciones página 16

• Press the ON/OFF switch, the power indicator (red) will be
illuminated, turn the knob to the "
steam button is on the higher position which is the "
when there is water flowing out, close the pump by turning the knob
to the "
is heated.
• When the coffee indicator is illuminated, it shows the heating is
finished. Turn the knob to the "
coffee (about 2 oz.). Then close the pump and wait for 5s.
• Press the steam button down to the lower position which is the "
position, waiting until the steam indicator is illuminated. Make steam
for 2 minutes, then turn the knob to the "
steam. Press the power switch to stop the unit immediately, leave the
descale deposit in the unit for at least 15 minutes.
• Restart the unit and repeat the steps 4 to 6 at least 3 times.
• Then press and release the steam button to the higher position
which is the "
Turn the knob to the "
• Then brew coffee (with no coffee powder) with tap water in the MAX
level, repeat the steps 4 to 6 for 3 times (it is not necessary to wait
for 15 minutes in step 6), then brew until no water is left in the tank.
• Repeat step 9 at least 3 times to make sure the piping is clean.
16
AF Manual Instruç o ̃ e s Má q uina de café A5 EN 3mm.indd 16
" position, and wait for a moment, until the coffee maker
" position, when the coffee indicator is illuminated.
" position to brew until no descale is left.
" position, make sure the
" position and make two cups
" position to stop the
" position,
"
02/09/16 10:58